Quatro Mill information

What little info there is on the QuatroMill

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3592
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Quatro Mill information

Post by Denford Admin » Fri 08 Oct , 2010 12:23 pm

Quatro Mill Installation Programming and Maintenance.pdf
QuatroMill brochure and parts list.pdf
Attachments
QuatroMill brochure and parts list.pdf
(2.3 MiB) Downloaded 1207 times
Quatro Mill Installation Programming and Maintenance.pdf
(4.28 MiB) Downloaded 715 times

Andy B
CNC Guru
CNC Guru
Posts: 349
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Quatro Mill information

Post by Andy B » Sat 12 Nov , 2016 22:07 pm

Quatro Circuit diagrams for Heidenhain control.
Attachments
Quatro wiring 1.pdf
Wiring diagrams from CD file A3 scans8.pdf
(5.78 MiB) Downloaded 298 times

Andy B
CNC Guru
CNC Guru
Posts: 349
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Quatro Mill information

Post by Andy B » Sat 12 Nov , 2016 22:16 pm

Quatro circuit diagrams for other control
Attachments
Quatro wiring 2.pdf
Taken from CD file A3 Scans7.pdf
(4.31 MiB) Downloaded 171 times

Andy B
CNC Guru
CNC Guru
Posts: 349
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Quatro Mill information

Post by Andy B » Sat 12 Nov , 2016 22:35 pm

Quatro & Heidenhain 355 info
Attachments
Quatro wiring 3.pdf
From CD file A3 Scans2.pdf
(3.11 MiB) Downloaded 148 times

Post Reply