Nextmove 7 Segment LED status and fault display

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Nextmove 7 Segment LED status and fault display

Post by boots » Fri 19 Jan , 2007 15:21 pm

What are the displays and meanings on the Nextmove card 7 segment LED display?
I have a 2 on the display, not an S or 5, a 2. Any Ideas?
Thank You

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Fri 19 Jan , 2007 17:38 pm

Take a look at this

stuff/NextStepLEDSWEB.htm

!! Take careful note of what the dot is doing as well as just the number displayed !!

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Thu 15 May , 2008 16:33 pm

These alarms refer to the green and new yellow 7 Segment displays.

The Yellow display signifies the next move is ROHS compliant.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Nextmove 7 Segment LED status and fault display

Post by Steve » Thu 27 Jan , 2011 9:07 am

The Red Denstep control card has different display indicators.

These are detailed in the following Post:

viewtopic.php?f=54&t=3167

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Nextmove 7 Segment LED status and fault display

Post by Denford Admin » Thu 01 Sep , 2011 8:47 am

Here are the latest 7 segment led display codes for the Nextmove ST boards (green or orange LEDs)
Attachments
NextmoveST-LED-Codes.pdf
(30.06 KiB) Downloaded 1343 times

Post Reply