Nextmove No Firmware

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Nextmove No Firmware

Post by Steve » Fri 16 Sep , 2016 8:08 am

If your NextMove controller card has lost its firmware it will no longer communicate with the Denford software or Easy Upgrader.

Workbench is located in the utility directory on the VR Milling Software CD. This package will identify the controller with no firmware.

The attached document explains how to upgrade the card and the attached MSX file is the firmware that should be loaded.
Attachments
NextMove ST Build 5403 USB CANopen.zip
(703.41 KiB) Downloaded 514 times
How to reload firmware to a NextMove ST Card.pdf
(58.52 KiB) Downloaded 701 times

Post Reply