fanuc om-c controller parameter and diagnostic list descript

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
masroorkhan
Posts: 18
Joined: Fri 20 Mar , 2015 17:25 pm

fanuc om-c controller parameter and diagnostic list descript

Post by masroorkhan » Fri 27 Mar , 2015 10:24 am

i need fanuc omc controller parameter and diagnostic list with description.so that what different parameter and diagnostic are doing.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: fanuc om-c controller parameter and diagnostic list desc

Post by Martin » Fri 27 Mar , 2015 12:16 pm

The 450 diagnostics are here.

viewtopic.php?f=47&t=981&hilit=450

masroorkhan
Posts: 18
Joined: Fri 20 Mar , 2015 17:25 pm

Re: fanuc om-c controller parameter and diagnostic list desc

Post by masroorkhan » Fri 27 Mar , 2015 14:04 pm

thank sir i already read it when i lost all my parameter last time and then you help me by providing 2=osp servo motor parameter for triac fanuc atc vmc.

but this list is limited to only 450 to 464 diagnostic and 700 to 708 parameter.

i want complete list of parameter from 1 to 8355 with description and complete description list for diagnostic.

i know some of diagnostic are for debugging propose.

i already search it on google but didn't find complete list of parameter and diagnostic description.

if it is possible from denford to share that information in bit detail other than specific one.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: fanuc om-c controller parameter and diagnostic list desc

Post by Martin » Fri 27 Mar , 2015 14:11 pm

As far as I know the parameter list is all we have. We would have used a Fanuc Programming Manual to set the parameters value but these have long since gone. You may be able to get a copy from Fanuc.

Post Reply