old triac 24 pin connector

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
colinhughes
Posts: 2
Joined: Sat 26 Jul , 2014 17:04 pm
Hardware/Software: Triac
Mach3

old triac 24 pin connector

Post by colinhughes » Fri 01 Aug , 2014 14:23 pm

HI have recently obtained a old denford triac. it has no electronics at all. I plan to run it on mach 3. there are two 24 pin plugs coming from the back of the machine (4 rows of 6 pins). I wonder if anyone Has any info on the wiring of these plugs.
Thanks....Colin

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: old triac 24 pin connector

Post by angel-tech » Fri 01 Aug , 2014 15:27 pm

in the triac section there is a manual for your machine.

colinhughes
Posts: 2
Joined: Sat 26 Jul , 2014 17:04 pm
Hardware/Software: Triac
Mach3

Re: old triac 24 pin connector

Post by colinhughes » Fri 01 Aug , 2014 17:42 pm

Yes I've looked at that but the only 24 pin connectors in the manual are to the monitor console. The connectors on my machine are from the stepper motors and limit switches etc. So are different from the manual.

Post Reply