Siemens Micromaster 410

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Calgone
Posts: 9
Joined: Thu 19 Jun , 2014 12:30 pm
Hardware/Software: Solidworks
HSMXpress
Denford Orac
XYZ Milling Machine
Cubex Duo 3D Printer

Siemens Micromaster 410

Post by Calgone » Thu 26 Jun , 2014 22:48 pm

Hi,

My Siemens Micromaster 410 has broken.

They do not make it any more.
Can I use a Siemens Sinamics G110 inverter w/filter, 0.37kW

I use it on my orac lathe spindle motor.

Any help would be great.

Calgone
Posts: 9
Joined: Thu 19 Jun , 2014 12:30 pm
Hardware/Software: Solidworks
HSMXpress
Denford Orac
XYZ Milling Machine
Cubex Duo 3D Printer

Re: Siemens Micromaster 410

Post by Calgone » Thu 03 Jul , 2014 21:30 pm

Ok,
A new update.

I am going to use a Sinamics G110 Inverter with filter 0.37kw with Din Rail Mount (RS No: 505-2129)
This should match the original motor on the lathe.
Controlling it with a Cnc4pc C11T Breakout board.
Also the following power supplies:
Meanwell MDR-10-5 5Vdc 2A Din Rail Mount (RS No: 712-7402)
Meanwell MDR-10-12 12Vdc 0.84A Din Rail Mount (RS No: 712-7411)

Controlling it with Mach3

Hope this will help some one.

Post Reply