Triac PC Electrical Drawings

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Garvock
Posts: 23
Joined: Thu 03 Jul , 2008 8:51 am

Triac PC Electrical Drawings

Post by Garvock » Fri 02 Apr , 2010 21:52 pm

Hi,
Does anyone have electrical drawings for a Triac PC manufactured in 2000. I have downloaded a couple from 1999, they are numbered TR6-m01 and TR6-m11 so presume the series runs from TR6-m01 up. Any help would be appreciated.

many thanks
Top
Garvock
Posts: 23
Joined: Thu 03 Jul , 2008 8:51 am

Re: Triac PC Electrical Drawings

Post by Garvock » Sun 04 Apr , 2010 16:35 pm

Hi,
I have some more info if it helps!
ser no. H00688/3
elect ser no. OC00222465
I have downloaded some more drawings, but there are 131 pages and several different series of drawings.I am busy trying so suss out the correct ones.
Any help in identifying the correct dwg numbers would be great.

thanks again
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Triac PC Electrical Drawings

Post by Denford Admin » Wed 07 Apr , 2010 11:50 am

This is your original spec sheet if that helps ?
Attachments
H00688_1.pdf
(35.74 KiB) Downloaded 1662 times
Top
Garvock
Posts: 23
Joined: Thu 03 Jul , 2008 8:51 am

Re: Triac PC Electrical Drawings

Post by Garvock » Wed 07 Apr , 2010 12:32 pm

Hi
Thanks for that but I was hoping for specific electrical drawings for this machine. It appears that every one is different depending on options fitted etc.
I think I can manage to peice together all the information from the drawings I have and do my own drawings. I have no problems with the machine I just like to have all the information to hand!

thanks
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Triac PC Electrical Drawings

Post by Denford Admin » Wed 07 Apr , 2010 13:25 pm

Ok - I thought the spec sheet will at least confirm which drives, motors and options were fitted
Top
Post Reply

Return to “Electronics”