harrison vs280 cnc lathe

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
Gerry3D
Posts: 2
Joined: Tue 23 Mar , 2010 12:30 pm

harrison vs280 cnc lathe

Post by Gerry3D » Wed 24 Mar , 2010 11:54 am

hi wondering can anny boddy help me with a harrison lathe moddle vs280 cnc
year 1990 . it has a denford controler. and i wood like to retafit it to mack3
or simler. anny help please

thanks
gerry 3d

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: harrison vs280 cnc lathe

Post by Denford Admin » Wed 24 Mar , 2010 12:16 pm

There are lots on here who have converted to Mach, although no Viceroys that I'm aware of.
eg:
viewtopic.php?f=43&t=1729
viewtopic.php?f=46&t=452

Post Reply