Denford Software & Machines

The External Machine link Cable part number is BI01812GG

This cable was manufactured by Lindy and is black in colour.

The cable was used on all machines (other than the MicroMill and MicroTurn supplied in the USA)

The Internal serial cable used in conjunction with this cable was BI01812A

Pin outs of the Machine Link Cable...

9 Pin Female (computer end) 25 Pin Male (Machine)

9 Pin 25 Pin


2 --------------RED----------------------2
3 -------------WHITE---------------------- 3
8 --------------BLUE---------------------- 4
7 --------------BLACK--------------------- 5
5 -------------YELLOW-------------------- 7

(1, 4 & 6 linked in 9 Way) (6, 8 & 20 linked in 25 Way)

PDF Cable Drawing

Steve wrote:The External Machine link Cable part number is BI01812GG

This cable was manufactured by Lindy and is black in colour.

The cable was used on all machines (other than the MicroMill and MicroTurn supplied in the USA)
<SNIP>

Would you please post a drawing of the cable used in the USA and also one of the BI01812A cable?

Thanks,
Orin

Hi,

The attached post shows the internal cables.

I believe you have a US MicroMill and a Microturn so the internal cable you have fitted will be: BI01812B

The external cable is a BI01812N This is a standard Null modem cable.

viewtopic.php?f=36&t=2384&p=8630&hilit=BI01812A#p8630

The attached link shows the connections required if you connect a cable directly to the Baldor control card to the PC:

viewtopic.php?t=231

You can buy a cable in the USA from Newark

PRO SIGNAL - PSG90340 - LEAD, MODEM, 9WAY-25WAY D SOCKETS
Newark Part Number: 43T6042 Manufacturer Part No: PSG90340

http://www.newark.com/pro-signal/psg903 ... dp/43T6042

See attached drawing of cable (this would allow connection of 25 way to 9 way or 25 way to 25 Way)

Steve wrote:
The attached link shows the connections required if you connect a cable directly to the Baldor control card to the PC:

viewtopic.php?t=231

SUCCESS..

Thanks Steve,

I made a direct PC to Baldor Control cable and it works great!! Thanks for your help.

Orin