problems with a denstep card

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
jaimestevez
Posts: 1
Joined: Thu 25 May , 2006 1:11 am
Location: veracruz, mexico

problems with a denstep card

Post by jaimestevez » Thu 25 May , 2006 1:18 am

the acid of the battery damages the card.
meaby i can upgrade this card. But there is a problem. i'm on Veracruz, Mexico. here is the triac vmc.

wich one dealer i can contact?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Thu 25 May , 2006 9:33 am

Try
Harry Mazal SA de CV
Laguna de Tamiahua No. 204
Col. Anahuac, Deleg Miguel Hidalgo
11320 Mexico, DF
Tel 00 52 55 53961133
Fax 00 52 55 53968649

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Thu 25 May , 2006 13:40 pm

Is the card fitted to a rack?

You may be able to upgrade the machine control card and software to VR Milling 5 with a USB interface.

See the links below.

viewtopic.php?p=267#267

Post Reply