baldor usb driver 64 bit

Information and questions about Denford CNC Control electronics, general electrical issues, cables, diagrams, stepper motors, drives etc...

Moderators: Steve, Mr Magoo, Martin, bradders

Post Reply
jimble
Posts: 3
Joined: Tue 31 Oct , 2006 19:02 pm

baldor usb driver 64 bit

Post by jimble » Tue 13 Sep , 2011 12:46 pm

hi i'm operating windows 7 64bit on my laptop - unfortunately the computer controlling the denford router 2600 has gone down.

i can install vr miller - but the usb balder file isn't compatible with 64bit just wandered if anyone knows where i can get a compatible driver or a work around

User avatar
Denford Admin
Site Admin
Posts: 3588
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: baldor usb driver 64 bit

Post by Denford Admin » Tue 13 Sep , 2011 13:19 pm

You can get the latest software downloads from our website here:
http://www.website.denford.ltd.uk/suppo ... -downloads

Download the latest zipped CD image of VR Milling v5 and the 64 bit usb driver can be installed from the CD menu (4th or 5th option down IIRC)

User avatar
dixonsca
CNC Apprentice
CNC Apprentice
Posts: 56
Joined: Tue 19 Sep , 2006 17:04 pm
Hardware/Software: Denford Magnum router. (now upgraded to a 3d router using retrofit kit macmotion controller and upgraded stepper motors)
Triac PC
Nova mill
Microrouter
Turn 270 Pro
Unimatic 4th axis
Makerbot Replicator 2
VR Milling 5
techsoft 2d design
corel draw
solidworks
artcam
lathecam designer
quickturn 2d
Location: Bradford
Contact:

Re: baldor usb driver 64 bit

Post by dixonsca » Wed 10 Jul , 2019 8:08 am

This link doesn't seem to work. have you moved it?

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1261
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: baldor usb driver 64 bit

Post by Steve » Wed 10 Jul , 2019 8:23 am

The link changed when we updated our website

http://website.denford.ltd.uk/software- ... s-support/

Download the latest version of VRMilling 5 from the link and install the new driver from the menu on CD.

http://www.denfordata.com/downloads/VRMilling_V5_68.zip

I would also install the latest version of VR Milling

User avatar
Denford Admin
Site Admin
Posts: 3588
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: baldor usb driver 64 bit

Post by Denford Admin » Wed 10 Jul , 2019 10:20 am

The software download page has been updated. Both the 32 and 64 bit USB drivers can be downloaded by following the links.

Or they can be downloaded directly from here :

http://denfordata.com/downloads/USBDriver32bit.zip

http://denfordata.com/downloads/USBDriver64bit.zip

User avatar
dixonsca
CNC Apprentice
CNC Apprentice
Posts: 56
Joined: Tue 19 Sep , 2006 17:04 pm
Hardware/Software: Denford Magnum router. (now upgraded to a 3d router using retrofit kit macmotion controller and upgraded stepper motors)
Triac PC
Nova mill
Microrouter
Turn 270 Pro
Unimatic 4th axis
Makerbot Replicator 2
VR Milling 5
techsoft 2d design
corel draw
solidworks
artcam
lathecam designer
quickturn 2d
Location: Bradford
Contact:

Re: baldor usb driver 64 bit

Post by dixonsca » Wed 10 Jul , 2019 10:57 am

Thank you

Post Reply