Tom Senior M1 Column drawing

Any info relating to Tom Senior mills and lathes

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
RNR107
CNC Apprentice
CNC Apprentice
Posts: 41
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Tom Senior M1 Column drawing

Post by RNR107 » Thu 18 Aug , 2011 22:28 pm

Hi all,
Anybody got drawings with dimensions of the main column of the M1 mill?

I am geting a rising block made and I find it very difficult to measure the dovetail.
A drawing showing the dovetail with angles and dimensions would be of a really great help. :o

Thank you,
RNR

Andy B
CNC Guru
CNC Guru
Posts: 349
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Tom Senior M1 Column drawing

Post by Andy B » Fri 19 Aug , 2011 11:09 am

I'll have a look over the weekend.

Andy

RNR107
CNC Apprentice
CNC Apprentice
Posts: 41
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Re: Tom Senior M1 Column drawing

Post by RNR107 » Fri 19 Aug , 2011 13:58 pm

Thank you Andy!

Post Reply