ZeroTurn spindle bore

Any information regarding the Denford ZeroCentre ZeroTurn ZeroBore Fanuc CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Hood
Posts: 2
Joined: Mon 31 Oct , 2011 10:19 am

ZeroTurn spindle bore

Post by Hood » Mon 31 Oct , 2011 10:24 am

Hi,
I may be getting a ZeroTurn and was wondering if anyone knows the spindle bore?

Hood

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: ZeroTurn spindle bore

Post by Denford Admin » Wed 02 Nov , 2011 10:13 am

Sorry - I've had a look and we haven't seen any Zeroturn brochures when scanning the old documents in.
These machines are pretty rare and there is definately a lack of info about them here :(

Hood
Posts: 2
Joined: Mon 31 Oct , 2011 10:19 am

Re: ZeroTurn spindle bore

Post by Hood » Wed 02 Nov , 2011 19:30 pm

Thanks
Yes, had a look through the info on the forum and the brochure mentions 65mm spindle but that seems to be the outer. I think I also read they have a A2-5 spindle nose so was thinking 38mm would be about right.
Not sure if I will be getting it anyway as I have not heard back :(
Hood

Post Reply