ZeroCentre / ZeroTurn / ZeroBore Image gallery

Any information regarding the Denford ZeroCentre ZeroTurn ZeroBore Fanuc CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

ZeroCentre / ZeroTurn / ZeroBore Image gallery

Post by Denford Admin » Fri 29 Jan , 2010 16:06 pm

ZeroCentre / ZeroTurn / ZeroBore Image gallery
Attachments
zerobore.jpg
zerobore.jpg (66.85 KiB) Viewed 10275 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery

Post by Denford Admin » Tue 31 May , 2011 9:29 am

Some photos of a used Zero Centre (advertised on ebay May 2011)
Seemingly, we only made 14 of these!
Attachments
ZeroCentreUsed3.jpg
ZeroCentreUsed3.jpg (60.97 KiB) Viewed 10109 times
ZeroCentreUsed2.jpg
ZeroCentreUsed2.jpg (47.89 KiB) Viewed 10109 times
ZeroCentreUsed1.jpg
ZeroCentreUsed1.jpg (55.51 KiB) Viewed 10109 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery

Post by Denford Admin » Wed 09 May , 2012 13:15 pm

A Zeroturun with fanuc control:
Attachments
zeroturn-fanuc.jpg
zeroturn-fanuc.jpg (45.71 KiB) Viewed 9936 times

inovar
Posts: 4
Joined: Fri 22 Mar , 2013 17:39 pm
Hardware/Software: Denford Zeroturn S/NZT-10097A Fanuc OT control
Location: Perth Australia

Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery

Post by inovar » Sat 23 Mar , 2013 11:02 am

Here are some images of the Denford ZeroTurn with Fanuc OT control that I have just purchased second hand of course.
front.jpeg
front.jpeg (140.21 KiB) Viewed 9721 times
control.jpeg
control.jpeg (118.66 KiB) Viewed 9721 times
turret.jpeg
turret.jpeg (126.58 KiB) Viewed 9721 times
collet head.jpeg
collet head.jpeg (248.78 KiB) Viewed 9721 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: ZeroCentre / ZeroTurn / ZeroBore Image gallery

Post by Denford Admin » Mon 25 Mar , 2013 12:00 pm

As this machine didn't have an operators manual, I presume mode changing was carried out on screen with the "Software Operator Panel" option.
Parameter: 908.7 (eg 1000 0000)

Post Reply