VMC 1300 AC power requirements

All info relating to the Denford VMC1300 and VMC1300 Pro CNC milling machines

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
dawhalen
Posts: 1
Joined: Sat 07 Feb , 2015 16:41 pm
Hardware/Software: Micromill, Microrouter, Vertical Router
Location: USA - West Coast
Contact:

VMC 1300 AC power requirements

Post by dawhalen » Tue 16 Oct , 2018 0:07 am

Does the VMC 1300 run on 120VAC or does it require 230VAC - this is for use in Washington State, USA

I work with a distributor in California and need to know.

Thanks

Martin
CNC Guru
CNC Guru
Posts: 1678
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: VMC 1300 AC power requirements

Post by Martin » Tue 16 Oct , 2018 0:14 am

The VMC 1300 can be supplied with either. The 120 volt version just has an auto transformer fitted internally to increase it to 240 volts.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1267
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: VMC 1300 AC power requirements

Post by Steve » Thu 18 Oct , 2018 10:55 am

http://website.denford.ltd.uk/wp-conten ... e-2017.pdf

The international catalogue indicates the power option for all the machines.

See page 26.

Post Reply