TDS 1 LS-Leadscrew drawings

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
De-El
Posts: 8
Joined: Tue 02 Apr , 2019 15:50 pm
Hardware/Software: Viceroy TDS 1 LS

TDS 1 LS-Leadscrew drawings

Post by De-El » Wed 03 Apr , 2019 9:26 am

Good day,

I posted this over in the downloads section.
viewtopic.php?f=15&t=5707
Just linking to it from here hoping to find the info I am after.

Regards
D

rpwilson
CNC Expert
CNC Expert
Posts: 155
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.

Re: TDS 1 LS-Leadscrew drawings

Post by rpwilson » Wed 03 Apr , 2019 11:49 am

ML 105 402 and 403? What parts are they?

Richard

De-El
Posts: 8
Joined: Tue 02 Apr , 2019 15:50 pm
Hardware/Software: Viceroy TDS 1 LS

Re: TDS 1 LS-Leadscrew drawings

Post by De-El » Wed 03 Apr , 2019 13:17 pm

Richard

ML 105/402 is the 'English'-thread Leadscrew
ML 105/402C is the Metric-thread Leadscrew

ML 105/403 is the Leadscrew collar

Regards
D

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: TDS 1 LS-Leadscrew drawings

Post by Andy B » Wed 03 Apr , 2019 13:36 pm

Leadscrew drawings now uploaded in this thread - viewtopic.php?f=50&t=2941&p=22970#p22970


Collar drawing was already uploaded in this pack of scans - http://www.denfordata.com/downloads/for ... 0scans.pdf

If anyone wants to produce a list of the drawings in each of the packs already uploaded, please do so and send it to me so that I can add to the original post and make searching easier.

Andy

Edited to add extra info.

rpwilson
CNC Expert
CNC Expert
Posts: 155
Joined: Tue 03 Jun , 2014 15:20 pm
Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.

Re: TDS 1 LS-Leadscrew drawings

Post by rpwilson » Wed 03 Apr , 2019 13:47 pm

I've got a scanned copy of ML105 400 which is a general arrangement of the leadscrew, the collar and the support brackets if thats any help, at least it show how they fit together. Is it the metric leadscrew or the imperial one you need? They will be the same except that one will have an 8TPI thread and the other will have a 3mm pitch thread.
At times like this, Ebay is your friend for parts.

Richard

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: TDS 1 LS-Leadscrew drawings

Post by Andy B » Wed 03 Apr , 2019 13:59 pm

Just uploaded ML105/400 too - same post as the leadscrews

Andy

De-El
Posts: 8
Joined: Tue 02 Apr , 2019 15:50 pm
Hardware/Software: Viceroy TDS 1 LS

Re: TDS 1 LS-Leadscrew drawings

Post by De-El » Wed 03 Apr , 2019 20:14 pm

Andy B wrote:
Wed 03 Apr , 2019 13:36 pm
Leadscrew drawings now uploaded in this thread - viewtopic.php?f=50&t=2941&p=22970#p22970


Collar drawing was already uploaded in this pack of scans - http://www.denfordata.com/downloads/for ... 0scans.pdf

If anyone wants to produce a list of the drawings in each of the packs already uploaded, please do so and send it to me so that I can add to the original post and make searching easier.

Andy

Edited to add extra info.
Thank you so much Andy.
This helps me a lot.

I did go through the pack of scans already, unfortunately ML105/403 is not in there. But it looks like a very simple part I can derive from the arrangement drawing, ML105/400, and make my own if the original drawing is not available. I just want to try and stick as close to the original as possible were I can.

Regards
D

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: TDS 1 LS-Leadscrew drawings

Post by Andy B » Wed 03 Apr , 2019 21:14 pm

De-El wrote:
Wed 03 Apr , 2019 20:14 pm
I did go through the pack of scans already, unfortunately ML105/403 is not in there.
Yes it is - on page 23.
It must have been out of sequence when the pile was scanned - between ML105/306 and ML105/307.

Andy

De-El
Posts: 8
Joined: Tue 02 Apr , 2019 15:50 pm
Hardware/Software: Viceroy TDS 1 LS

Re: TDS 1 LS-Leadscrew drawings

Post by De-El » Thu 04 Apr , 2019 7:17 am

Andy B wrote:
Wed 03 Apr , 2019 21:14 pm
De-El wrote:
Wed 03 Apr , 2019 20:14 pm
I did go through the pack of scans already, unfortunately ML105/403 is not in there.
Yes it is - on page 23.
It must have been out of sequence when the pile was scanned - between ML105/306 and ML105/307.

Andy
Oops, sorry I didn't notice that, I see it is there yes.

Thank you.
D

Post Reply