http://www.ebay.co.uk/itm/Benford-vicro ... 3398f934e6
Looks quite nice.
Interesting to see what it goes for.
Les.T.
Another Viceroy on Ebay-2
Moderators: Martin, Steve, Mr Magoo
-
LesT
- CNC Expert
- Posts: 118
- Joined: Wed 11 Aug , 2010 14:17 pm
- Hardware/Software: An old Viceroy with a half installed invertor drive,(when I can decide where to put the control pushbuttons I will wire it up properly)
A WMD25V mini mill.
Tractor, Bobcat 320, and Dumper truck.
7 sheds, about 5 (?) mowers. etc, etc. - Location: Scotland !
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Another Viceroy on Ebay-2
Horrible paint job on it!
Does have a threadcutting dial indicator and the cover & plate for transposing gears - but are the gears there?
Andy
Does have a threadcutting dial indicator and the cover & plate for transposing gears - but are the gears there?
Andy
-
LesT
- CNC Expert
- Posts: 118
- Joined: Wed 11 Aug , 2010 14:17 pm
- Hardware/Software: An old Viceroy with a half installed invertor drive,(when I can decide where to put the control pushbuttons I will wire it up properly)
A WMD25V mini mill.
Tractor, Bobcat 320, and Dumper truck.
7 sheds, about 5 (?) mowers. etc, etc. - Location: Scotland !
Re: Another Viceroy on Ebay-2
I memo'd the seller to ask about change gears, they did reply, but they either didn't understand or weren't willing
to put any effort into looking I guess.
Les.T.
to put any effort into looking I guess.
Les.T.
-
rpwilson
- CNC Expert
- Posts: 156
- Joined: Tue 03 Jun , 2014 15:20 pm
- Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.
Re: Another Viceroy on Ebay-2
No sign of any additional gears in the photos, so probably not. Looks like its got the 16T gear fitted, so OK for fine feeds anyway.
At 300 with 2 days to go, its still a cheap lathe, even with that paint.
At 300 with 2 days to go, its still a cheap lathe, even with that paint.