Thanks to Andy, putting drawings on this forum, I've made a pattern for the 280 metric/english translation quadrant, and have nearly finished a pattern for the support brackets for the copying/taper attachment which fits the 5" and the 280. The support bracket casting does both brackets just needs cutting in 2. I'll probably be taking them to the foundry in a couple of weeks, so before I do, is anyone else interested in principle, in having either casting? I don't know the price until I'm there, but based on previous experience it could be around £50 per casting.
Denford apparently used the same casting for both the metric/english and english/metric quadrant, although this did result in one of the pin holes being well out of centre on the casting. I haven't yet checked if mine will also suit the english/metric gear centres, but it should do.
Richard Wilson
5" and 280 castings
Moderators: Martin, Steve, Mr Magoo
-
Taylon
- CNC Apprentice
- Posts: 48
- Joined: Fri 05 Apr , 2013 0:14 am
- Hardware/Software: Standard PC using Firefox Browser.
Denford Viceroy TDS/PCS version 2 Metric Lathe - Location: Staffordshire, UK
Re: 5" and 280 castings
Hello,
I'd be interested in having the taper turning bracket casting made. Please PM with further details.
Kindest regards, John R.
I'd be interested in having the taper turning bracket casting made. Please PM with further details.
Kindest regards, John R.
-
rpwilson
- CNC Expert
- Posts: 156
- Joined: Tue 03 Jun , 2014 15:20 pm
- Hardware/Software: None. I own a pre CNC Denford 280 Synchro lathe.
Re: 5" and 280 castings
PM sent.Taylon wrote:Hello,
I'd be interested in having the taper turning bracket casting made. Please PM with further details.
Kindest regards, John R.