Hi
My eyes are getting old so I have fitted a magnifying light to my lathe.
I made an adapter to support the lamp. An easy job.
Viceroy now fitted with magnifying light
Moderators: Martin, Steve, Mr Magoo
-
dazz
- CNC Expert
- Posts: 246
- Joined: Sat 19 Aug , 2006 11:31 am
- Hardware/Software: Viceroy TDS 1/1GB lathe, Imperial, stripped down and rebuilt.
Viceroy Taper/Tracer attachment, Shop made cross slide tracer attachment, VSD. - Location: New Zealand
Viceroy now fitted with magnifying light
- Attachments
-
- The magnifying lamp provides shadowless light and is easily swung out of the way.
- IMG_2759.JPG (127 KiB) Viewed 2879 times
-
- The support bolts straight onto the taper turning bar. The hole is perfectly located to support a lamp.
- IMG_2760.JPG (76.84 KiB) Viewed 2879 times
Regards
Dazz
Dazz