Viceroy TDS 6WL Wood Turning Lathe Manual & Drawings

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Viceroy TDS 6WL Wood Turning Lathe Manual & Drawings

Post by bradders » Thu 09 Dec , 2010 15:34 pm

Viceroy-TDS-6WL-Wood-Turning-Lathe.pdf
Attachments
Viceroy-TDS-6WL-Wood-Turning-Lathe.pdf
(1.99 MiB) Downloaded 2538 times

woodspin
Posts: 2
Joined: Mon 28 Feb , 2011 9:34 am
Hardware/Software: Viceroy DST Educator TDS 6WL

Re: Viceroy-TDS-6WL-Wood-Turning-Lathe.pdf

Post by woodspin » Mon 28 Feb , 2011 21:22 pm

Hi there, i've just bought one of these lathes and the pdf of the headstock was handy as i need to make a headstock shaft as its missing. I don't surppose theres another drawing of the main shaft with measurements and how its all put together. I have the bearings,couple of ring nuts and bearing caps. I've got the thread sizes and know its a 3mt but theres many things i don't know but hope to find out. Can anybody help???
I can guess alot of it but it would be good to keep it original.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Viceroy-TDS-6WL-Wood-Turning-Lathe.pdf

Post by Denford Admin » Tue 01 Mar , 2011 10:50 am

There are some other wood lathe drawings on here:
viewtopic.php?f=50&p=5232
viewtopic.php?f=50&t=1557

And here are the only WL drawing scans I can find:
http://www.denfordata.com/downloads/for ... -Scans.pdf

woodspin
Posts: 2
Joined: Mon 28 Feb , 2011 9:34 am
Hardware/Software: Viceroy DST Educator TDS 6WL

Re: Viceroy-TDS-6WL-Wood-Turning-Lathe.pdf

Post by woodspin » Fri 04 Mar , 2011 19:17 pm

Thanks. Its helped me out no end.

wilson294
Posts: 7
Joined: Thu 23 Feb , 2012 10:50 am
Hardware/Software: tds/23

Re: Viceroy-TDS-6WL-Wood-Turning-Lathe.pdf

Post by wilson294 » Sat 25 Feb , 2012 11:23 am

Hi
Im sure Ive got an inboard 4 inch face plate somewhere if you need it??

Gary

Post Reply