Viceroy now fitted with magnifying light

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
dazz
CNC Expert
CNC Expert
Posts: 246
Joined: Sat 19 Aug , 2006 11:31 am
Hardware/Software: Viceroy TDS 1/1GB lathe, Imperial, stripped down and rebuilt.
Viceroy Taper/Tracer attachment, Shop made cross slide tracer attachment, VSD.
Location: New Zealand

Viceroy now fitted with magnifying light

Post by dazz » Thu 14 Nov , 2013 0:13 am

Hi
My eyes are getting old so I have fitted a magnifying light to my lathe.
I made an adapter to support the lamp. An easy job.
Attachments
IMG_2759.JPG
The magnifying lamp provides shadowless light and is easily swung out of the way.
IMG_2759.JPG (127 KiB) Viewed 2878 times
IMG_2760.JPG
The support bolts straight onto the taper turning bar. The hole is perfectly located to support a lamp.
IMG_2760.JPG (76.84 KiB) Viewed 2878 times
Regards

Dazz

Post Reply