I have just got myself a Viceroy TDS 1/1 (c.1964) with an imperial lead screw and no gearbox. Does anyone have a copy of the change gear table for one of these?
I am fairly sure I don't have a full complement of gears but I don't know which ones I need!
Some help would be appreciated
Cheers
Nick
Change Gear Chart
Moderators: Martin, Steve, Mr Magoo
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Change Gear Chart
I'm sure I have that info somewhere - may take a while to find it though.
I'll see what I can find.
Andy
I'll see what I can find.
Andy
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Change Gear Chart
From the parts lists here http://www.denfordata.com/downloads/for ... -lists.pdf
it looks like the standard gear set is 16, 18, 24, 32, 40, 48, 72 & 80.
Also listed are 20, 28 and 100.
Andy
it looks like the standard gear set is 16, 18, 24, 32, 40, 48, 72 & 80.
Also listed are 20, 28 and 100.
Andy
-
Andy B
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Change Gear Chart
Haven't found the chart yet (CH112), but these 2 drawings show the complete gear set and how to calculate the pitch.
Andy
Andy
- Attachments
-
- ML105_100D.pdf
- Calcs
- (58.37 KiB) Downloaded 933 times
-
- ML105_100A1.pdf
- Gear train arrangements
- (80.93 KiB) Downloaded 727 times
Re: Change Gear Chart
Thanks for that - I have a very incomplete gear range.
Anyone know of a supply of gears - at a reasonable price obviously!
Anyone know of a supply of gears - at a reasonable price obviously!