Current VersaLaser Software Version

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
Martin
CNC Guru
CNC Guru
Posts: 1899
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Current VersaLaser Software Version

Post by Martin » Fri 03 Mar , 2006 12:35 pm

What is the current software version?
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Fri 03 Mar , 2006 12:36 pm

AS of 3.3.06 the latest version is 1.28.3
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Wed 15 Mar , 2006 11:26 am

As of 15.3.06 the current version of the Versa Laser software is 1.28.5
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 16 Mar , 2006 14:05 pm

Lastest is now:

VersaLaser New Installation v 1.28.5.zip (2Mb) Uploaded 14th March 2006 -here

VersaLaser Upgrade to v 1.28.5.zip (2Mb) Uploaded 14th March 2006 - here
Top
Post Reply

Return to “VersaLaser”