Networked Laptop means no output to laser!

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
Crakkers
CNC Apprentice
CNC Apprentice
Posts: 35
Joined: Fri 01 Dec , 2006 16:35 pm

Networked Laptop means no output to laser!

Post by Crakkers » Mon 15 Jan , 2007 22:22 pm

My school laptop has been working the laser fine, until I had it networked! Now when i create a cad dwg and press print it sometimes brings up the materials dialogue box, but never shows the image in the versa laser print preview page. I can switch the laser on and off, I can raise and lower the table, but I can not print! WHY????????????
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 16 Jan , 2007 10:24 am

This could be related to the fact that the user profile has changed by being put onto a network.
Try re-installing the versalaser drivers as the new network user.

If you still have problems, see this post about overcoming restricted user rights and the versalaser driver:
viewtopic.php?t=204
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Wed 17 Jan , 2007 9:21 am

Is the Laser the default printer on the computer when it is networked?

You may try setting it as the default :?:
Top
Post Reply

Return to “VersaLaser”