Denford Software & Machines

Ran into a problem at work today and the long and short of it is out IT guys say the PC attached to the VL 300 had to run 32bit rather than 64bit as the drivers will not work on a 64 bit win10 machine. A recent update had rolled out to the PCs on the network meant this messed up the laser PC as it is 32bit. I just wanted to check if there was an issue running the now quite old VL300 on win 10 64 bit.

Cheers Pete.

You can download version 1,30 from our website which includes 32 bit & 64 bit but does say Windows7 & try that.

http://www.denfordata.com/downloads/ulsinst-1.30.zip

Thanks, I've past the link on so they can play.

Pete