Page 2 of 2

Re: VLS3.50

Posted: Tue 03 May , 2016 11:59 am
by TracyB
To add to this, the interlock is saying open under the system tab, the red dot does not turn off when the door is open and closed.

Re: VLS3.50

Posted: Wed 04 May , 2016 12:17 pm
by bradders
Tracy,

Can you contact Denford's on 01484 728000

Have you tried unplugging the USB cable from the Laser, switching on the Laser and PC on, and reconnecting the USB cable. This we down load the firmware again which could be causing the problem.