VLS3.50

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Mr Magoo, Martin, bradders, Steve

TracyB
Posts: 13
Joined: Thu 28 Apr , 2016 10:08 am
Hardware/Software: Universal Laser System VLS3.50
LaserCAM 2D Design

Re: VLS3.50

Post by TracyB » Tue 03 May , 2016 11:59 am

To add to this, the interlock is saying open under the system tab, the red dot does not turn off when the door is open and closed.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1248
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: VLS3.50

Post by bradders » Wed 04 May , 2016 12:17 pm

Tracy,

Can you contact Denford's on 01484 728000

Have you tried unplugging the USB cable from the Laser, switching on the Laser and PC on, and reconnecting the USB cable. This we down load the firmware again which could be causing the problem.

Post Reply