focus height calibration tool VL300

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
TDIPower
CNC Guru
CNC Guru
Posts: 353
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Roland CAMM3 PNC3000 (For Sale)
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

focus height calibration tool VL300

Post by TDIPower » Tue 20 May , 2014 22:57 pm

Hi does anyone have either the specs for a tool or one I could borrow to re calibrate the focus/bed height on a VL300.
I'm in the UK.

Long story short, I got hit by a car, off work 6months, technician un aware of the importance of seating the honeycomb bed properly. Since the cone drove itself into the bed the laser won't cut through anything on 1st pass.
We do have the tool somewhere but a lot has been moved about in my absence and the other staff are all saying they haven't seen it. We have never needed to use it before. I am wondering if the screw shafts that raise and lower the bed are driven via a toothed belt and if it may have skipped a tooth or two so the bed is at a slight angle as it does seem to cut ok to the right hand side of the bed.

Cheers

Pete

TDIPower
CNC Guru
CNC Guru
Posts: 353
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Roland CAMM3 PNC3000 (For Sale)
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: focus height calibration tool VL300

Post by TDIPower » Thu 24 Jul , 2014 9:07 am

No longer required.

Post Reply