VLS 3.50 stopping

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

VLS 3.50 stopping

Post by Martin » Thu 20 Dec , 2012 16:41 pm

I have come across 2 VLS 3.50 laser recently that stop while processing. Both machines were running ULS 5.33 software.

On both instances the customers were using the manual control.

The solution was to remove the ULS driver & then install ULS 5.34.54.31

Post Reply