Is our Versalaser fixable?

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
Angiei
Posts: 4
Joined: Thu 13 Dec , 2012 16:18 pm
Hardware/Software: Versalaser VL200

Is our Versalaser fixable?

Post by Angiei » Mon 17 Dec , 2012 13:51 pm

Hi,

I now realise the importance of not walking away from a running laser cutter as I came back to find ours on fire. The lid on our VL200 is now very damaged and the x-axis belt has burnt and is now far too loose. Does anyone know if these can be replaced?

Any advice would be greatly appreciated.

Martin
CNC Guru
CNC Guru
Posts: 1613
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Is our Versalaser fixable?

Post by Martin » Mon 17 Dec , 2012 17:55 pm

It's easily done.

We can supply a replacement belt & lid.

If you speak to Graham Bradley at Denfords he should be able to give you a price.

Are you sure there is no further damage. The air assisit pipe runs in the chanel below the belt & can also melt.

Angiei
Posts: 4
Joined: Thu 13 Dec , 2012 16:18 pm
Hardware/Software: Versalaser VL200

Re: Is our Versalaser fixable?

Post by Angiei » Tue 18 Dec , 2012 14:48 pm

Thanks for the info, that is reassuring news. I'll check the rest of the machine though and get in touch.

Post Reply