Laser Upgrade
Posted: Fri 26 Oct , 2012 17:00 pm
Hi all,
I have a VL-300 which is in need of the tube being reconditioned as it struggles to cut. The tube is a 30W version. Is it possible to get a higher power tube, say a 50W and install it into my 30W machine. I know that they made the VL-300 with a 50W tube from the instruction manual.
Cheers
Pete
I have a VL-300 which is in need of the tube being reconditioned as it struggles to cut. The tube is a 30W version. Is it possible to get a higher power tube, say a 50W and install it into my 30W machine. I know that they made the VL-300 with a 50W tube from the instruction manual.
Cheers
Pete