VL 200 says disconnected

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
ThomasG
Posts: 3
Joined: Sun 23 Sep , 2012 8:10 am
Hardware/Software: VL 200

VL 200 says disconnected

Post by ThomasG » Sun 23 Sep , 2012 8:14 am

Hi
Last week, when I want to start my VL-200 the printer driver says disconnected.
New driver installation did not work.
So I took my Laptop with new installed Windows an connected the USB cable.
Windows says…
New hardware found…USB-Hub… Software installed.
There is no question for driver cd.
Windows means it is only a hub but no device.

Thanks for helping !
Thomas
Top
Martin
CNC Guru
CNC Guru
Posts: 1898
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: VL 200 says disconnected

Post by Martin » Sun 23 Sep , 2012 11:46 am

Does the machine power on using the power button on the machine?
Top
ThomasG
Posts: 3
Joined: Sun 23 Sep , 2012 8:10 am
Hardware/Software: VL 200

Re: VL 200 says disconnected

Post by ThomasG » Sun 23 Sep , 2012 17:59 pm

No, it does not starts
Top
Martin
CNC Guru
CNC Guru
Posts: 1898
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: VL 200 says disconnected

Post by Martin » Sun 23 Sep , 2012 18:42 pm

It sounds as though the CPU is faulty & needs to be replaced.

Have you tried it on another computer?
Top
ThomasG
Posts: 3
Joined: Sun 23 Sep , 2012 8:10 am
Hardware/Software: VL 200

Re: VL 200 says disconnected

Post by ThomasG » Mon 24 Sep , 2012 16:36 pm

Yes I do.
Home Computer and Laptop.
Top
Post Reply

Return to “VersaLaser”