We have upgraded our fuses to 6.3 amp. BUT they keep blowing, so we have no air assist.
Any ideas on the problem / fix please?
Laser = VL300
Thanks
6.3 amp fuses keep blowing in air assist unit
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: 6.3 amp fuses keep blowing in air assist unit
It sounds as though the compressor unit may be faulty, and electrician should be able to test it out for you