VersaLaser Advanced Driver

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
nero
Posts: 2
Joined: Sun 20 Aug , 2006 13:04 pm

VersaLaser Advanced Driver

Post by nero » Thu 24 Aug , 2006 8:18 am

Is there a manual for the

VersaLaser Advanced Driver
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 24 Aug , 2006 8:58 am

There is the installation guide here:

http://www.denfordata.com/downloads/for ... driver.doc

:? Looks a bit in-depth - use at your own risk !

If I find anything else, I'll post it up
Top
casiopedia
Posts: 2
Joined: Wed 10 Oct , 2007 23:51 pm

VersaLaser Advanced Program

Post by casiopedia » Wed 10 Oct , 2007 23:57 pm

Do you have the Advance Program Install? Where can I download it.?
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Thu 11 Oct , 2007 11:13 am

Hi,

Where are you located and where did you purchase your laser?

Steve
Top
casiopedia
Posts: 2
Joined: Wed 10 Oct , 2007 23:51 pm

VersaLaser Advanced Program

Post by casiopedia » Thu 11 Oct , 2007 15:19 pm

I really don't know where it was purchased, I'm supposing that directrly from Universal Systems because we had replaced some parts with them in the past, but we have 2 laser machines, I'm Located in El Paso, TX, We have 1 Universal M-360 and a VersaLaser VL200 and I'm looking for the Versalaser Advanced Driver for my Versalaser.
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Thu 11 Oct , 2007 15:48 pm

I am not sure if we can distribute the advanced driver from here.

The ULS staff monitor our forum so hopefully they will reply and tell you how you can get hold of this.

I will make a request that they respond.
Top
ULS Service
Posts: 17
Joined: Tue 24 Apr , 2007 4:13 am

Advanced Printer driver

Post by ULS Service » Fri 12 Oct , 2007 10:50 am

Hello casiopedia,

The advanced driver is not for free and you have to attend a special training in Scottsdale at ULS Inc. before you allowed to get it.
Please get in contact with your sales person and let him know your machine serial numbers and also your request.

Thank you for your understanding.
best regards
best regards
Bernhard
Top
Post Reply

Return to “VersaLaser”