Error # 38 " Fixture Error "
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Error # 38 " Fixture Error "
What is an Error # 38 " Fixture Error "?
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: Error # 38 " Fixture Error "
Error # 38 " Fixture Error "
• Cause: Auto Z failure because of erroneous fixture height, usually due to corrupt Z value
• Response: Re-home Z and check lens height with fixture installed.
If this doesn´t help, I would recommend to restart the computer (also change the USB port) and remove other USB devices. This is to make sure that this is not related to the machine.
• Cause: Auto Z failure because of erroneous fixture height, usually due to corrupt Z value
• Response: Re-home Z and check lens height with fixture installed.
If this doesn´t help, I would recommend to restart the computer (also change the USB port) and remove other USB devices. This is to make sure that this is not related to the machine.