the voc indicator keeps come in ,and stops the cutting.
just had two new filters ,and clean. ?
ideas please.
voc indicator
Moderators: Martin, Steve, Mr Magoo
Re: voc indicator
What material are you cutting.
The VOC Alarm indicates toxic fumes are present.
It could be a faulty sensor.
The VOC Alarm indicates toxic fumes are present.
It could be a faulty sensor.
Re: voc indicator
found problem
the foam around the filter seal was uneven ,poss damaged in post ,or had bean sitting around face down,
thanks
the foam around the filter seal was uneven ,poss damaged in post ,or had bean sitting around face down,
thanks
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: voc indicator
Glad you found the problem and thanks for letting us know what to look for in future.