Cartridges for versalaser

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
3d worker
Posts: 21
Joined: Mon 19 Oct , 2009 9:41 am

Cartridges for versalaser

Post by 3d worker » Thu 20 Jan , 2011 9:59 am

Hi My Versalaser on the filter status says 75% full, the yellow led comes on.
firstly, Do I need to replace one cartridge?
secondly, How much does it cost?
thirdly, Is it easy to replace?
And finally, How much does Quickcam 2D Design program for the Vertical Router cost, we were supplied with 2D Design and Quickcam Pro when we bought ours.

Many thanks
Heather

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Cartridges for versalaser

Post by bradders » Fri 21 Jan , 2011 6:51 am

Hi Heather,
Yes you do need replacement filters, if you send an e mail to service@denford.co.uk we can supply prices for the filters and Quickcam 2D design.
Attachments
Denford Advantage Filter Unit Diagnostics and fault finding1.pdf
(83.73 KiB) Downloaded 998 times

3d worker
Posts: 21
Joined: Mon 19 Oct , 2009 9:41 am

Re: Cartridges for versalaser

Post by 3d worker » Wed 26 Jan , 2011 9:29 am

Thanks,
Ive Emailed as you asked.
Thanks

Post Reply