Techsoft Ver2 not the correct drawing size for the Laser bed

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Techsoft Ver2 not the correct drawing size for the Laser bed

Post by bradders » Tue 29 Jun , 2010 11:59 am

When I run Techsoft Ver 2 the drawing size does not match the Versa Laser (VL 200 in this case bed size), it is only 297 x 297 when i go into the following.......
SETUP > DRAWING > LAYOUT > Match to current printer (Which your laser should be set as your default printer)

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Techsoft Ver2 not the correct drawing size for the Laser bed

Post by bradders » Tue 29 Jun , 2010 12:09 pm

With the Laser powered up and connected to the PC with a USB cable. From the PC select START > PRINTERS AND FAXES. Find the VL200 driver and delete it. Then ADD A PRINTER, go into the Add Printer Wizard.
Select Local Printer
Select printer port ---- VERSA-1 (USB Port to VERSA)
Manufacturer ---- Universal Laser Systems
Printer ---- VL200

Post Reply