Versa Laser / Techsoft drawing help
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Versa Laser / Techsoft drawing help
Versa Laser / Techsoft drawing help
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
1. Versa Laser is just like a printer and requires printer drivers for the VL200/300
2. In Techsoft
BLACK LINES :- RASTER CUTTING
BLUE LINES :- VECTOR LINE CUT INTO SURFACE
RED LINES :- CUT ALL THE WAY THROUGH THE MATERIAL
To change line characteristics
Single click the line, select the COLOUR button from the top menu bar and alter the colour accordingly.
If the Coloured lines drawn in Techsoft are Black when opened up in the Versa Laser software then the wrong Line or Colour settings in Techsoft have been selected.
From the top menu bar in Techsoft select LINE, select the SOLID line and then activate the FINE radio button. For the COLOUR select COL from the top menu bar and then select the BLACK, BLUE and RED colours you require from the CUSTOM COLOUR section.
3. Set the printer to default to the laser printer driver
4. Print direct to printer option
2. In Techsoft
BLACK LINES :- RASTER CUTTING
BLUE LINES :- VECTOR LINE CUT INTO SURFACE
RED LINES :- CUT ALL THE WAY THROUGH THE MATERIAL
To change line characteristics
Single click the line, select the COLOUR button from the top menu bar and alter the colour accordingly.
If the Coloured lines drawn in Techsoft are Black when opened up in the Versa Laser software then the wrong Line or Colour settings in Techsoft have been selected.
From the top menu bar in Techsoft select LINE, select the SOLID line and then activate the FINE radio button. For the COLOUR select COL from the top menu bar and then select the BLACK, BLUE and RED colours you require from the CUSTOM COLOUR section.
3. Set the printer to default to the laser printer driver
4. Print direct to printer option
Last edited by bradders on Wed 28 Mar , 2007 12:26 pm, edited 2 times in total.