Extracting VL 300 to outside thru wall.

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
Crakkers
CNC Apprentice
CNC Apprentice
Posts: 35
Joined: Fri 01 Dec , 2006 16:35 pm

Extracting VL 300 to outside thru wall.

Post by Crakkers » Mon 15 Feb , 2010 18:56 pm

Hi

I have been advised by a Denford rep that I can remove all filters and run a tube from the bottom extraction port through the wall to extract to the outside and the machine will work well and will never need a filter again. Given the rising costs of filters and the falling funding of my dept this appears to be a good option.

Any advise / comments?
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Extracting VL 300 to outside thru wall.

Post by Denford Admin » Wed 17 Feb , 2010 12:49 pm

See this post I've just done on extraction:
viewtopic.php?f=5&t=2612
Top
Post Reply

Return to “VersaLaser”