Vera laser print machine says 'Disconnected'

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
3d worker
Posts: 21
Joined: Mon 19 Oct , 2009 9:41 am

Vera laser print machine says 'Disconnected'

Post by 3d worker » Thu 12 Nov , 2009 9:40 am

The 2D software is running well, but when I go to the UCP print page it says 'disconnected'.
The laser cutter is powering up ok and the start green led is on, usb is connected also, and extraction is working...it just wont print.
It worked well before could this be a software problem?
Thanks
Top
Martin
CNC Guru
CNC Guru
Posts: 1898
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Vera laser print machine says 'Disconnected'

Post by Martin » Thu 12 Nov , 2009 10:55 am

Are you running the latest ULS software?


I think it`s 5.26.45.
Top
3d worker
Posts: 21
Joined: Mon 19 Oct , 2009 9:41 am

Re: Vera laser print machine says 'Disconnected'

Post by 3d worker » Thu 12 Nov , 2009 12:37 pm

Our Software is Lasercam 2, I have hooked the lasercutter up to another PC ant it works well on it, no problems. It must be the original PC I was using.
Thanks
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Re: Vera laser print machine says 'Disconnected'

Post by bradders » Thu 12 Nov , 2009 15:55 pm

Have you got the Laser set as the default printer in Printers and Faxes ?
Top
Post Reply

Return to “VersaLaser”