ERROR 31 MOTION PACKET MISALIGNED TYPE 3

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

ERROR 31 MOTION PACKET MISALIGNED TYPE 3

Post by bradders » Fri 16 Jan , 2009 9:35 am

I get a "ERROR 31 MOTION PACKET MISALIGNED TYPE 3" on my VLS 2.30 30 Watt Laser
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Fri 16 Jan , 2009 9:36 am

I know on some computers (especially laptops) the USB power is insufficient and can cause disconnection & other errors. This may be manifesting in the 5.24.38 as an error #31. Please try a powered USB hub to see if this resolves the issue.

I have had a customer with this problem that was resolved by uninstalling & reinstalling the driver.
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Fri 16 Jan , 2009 10:23 am

I had some problems installing 5.24.38 on my laptop.

General rules when installing this driver.

ENSURE ALL OLDER DRIVER INSTALLATIONS ARE REMOVED FIRST!

ENSURE THE LAPTOP HAS THE POWER SUPPLY CONNECTED.

I COULD NOT GET THE USB DRIVER TO INSTALL CORRECTLY WHEN THE LAPTOP WAS ON BATTERY POWER.
Top
Post Reply

Return to “VersaLaser”