Z height not being set automatically

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
TWC
Posts: 4
Joined: Thu 28 Feb , 2008 17:19 pm
Location: Croydon

Z height not being set automatically

Post by TWC » Fri 07 Nov , 2008 12:17 pm

The Z height of our VSL3.5 is not adjusting itself automatically according to the material thickness.

I've seen references to the VCP on various sites but we don't seem to have it!

Any clues?
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Fri 07 Nov , 2008 12:35 pm

Look on the SYSTEM tab of your Versa Laser software. In there you will find the section for auto Z to compensate for your material thickness
Top
Post Reply

Return to “VersaLaser”