Versalaser & corel draw X4

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
chrisv
Posts: 11
Joined: Fri 25 Jan , 2008 15:19 pm
Location: South Wales

Versalaser & corel draw X4

Post by chrisv » Mon 29 Sep , 2008 12:41 pm

Hi, we are running versalaser software VLS 1.29.1 & are thinking of upgrading to Corel Draw X4, are the two compatible?

Thanks

Chris V.
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 02 Oct , 2008 9:39 am

I would be 99% sure it'll be ok as all previous version worked - can you get a trial version to try out 1st (or is printing disabled) ?
Top
Post Reply

Return to “VersaLaser”