Extraction unit now runs all the time on my VL 300

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Extraction unit now runs all the time on my VL 300

Post by bradders » Mon 21 Jan , 2008 10:53 am

The extraction fan unit has started to run all the time on my VL 300.

Basically they switch the Laser on and the fan unit used to start up, then stop, then start up and then stop again until you started cutting. Now it does start up, then stop, then start up and then keeps on running all the time. Any ideas?
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Mon 21 Jan , 2008 10:53 am

This sounds like the USB driver has encountered a problem.

A printer driver re-installation should help or the much smoother way, will be a driver update in the device manager of the computer.

If something like that happens, then the computer lost the USB device firmware.
Top
Post Reply

Return to “VersaLaser”