Versalaser and Plywood

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
oakwood
Posts: 1
Joined: Fri 07 Dec , 2007 11:33 am
Location: Oakwood TC Rotherham

Versalaser and Plywood

Post by oakwood » Fri 07 Dec , 2007 11:39 am

We are having problems cutting through plywood - any suggestions - the hard wood settings do not seem to cut through even on 3mm plywood
Top
Martin
CNC Guru
CNC Guru
Posts: 1898
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Fri 07 Dec , 2007 20:09 pm

Set the material type to Acrylic.

Set the depth as normal.
Top
Post Reply

Return to “VersaLaser”