Versalaser CPU Initialization auto Z and rotary calibration

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Versalaser CPU Initialization auto Z and rotary calibration

Post by Denford Admin » Thu 06 Dec , 2007 11:47 am

Download the Versalaser CPU Initialization auto Z and rotary calibration pdf from here:
http://www.denfordata.com/pdfs/versalas ... ration.pdf
Attachments
versalaser-cpu-initialization-auto-z-and-rotary-calibration.gif
versalaser-cpu-initialization-auto-z-and-rotary-calibration.gif (38.44 KiB) Viewed 16159 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Thu 06 Dec , 2007 11:49 am

** Please note that this information is provided as is, and we take no responsibility for events arising from its use or mis-use **

petereggington
Posts: 33
Joined: Sun 22 Apr , 2012 19:24 pm

Re: Versalaser CPU Initialization auto Z and rotary calibrat

Post by petereggington » Fri 08 Nov , 2013 17:37 pm

Hi Just reading how to reset and am a little confused at Step 4 on the pdf. It says if you have purchased proceed to step 6. Which wants you to set the 1.5 lens up. Surely this should read If you have not purchased other lens kits, skip to step 6

Or do I have it wrong?

Pete

Post Reply