Advantage Filter unit replacement filters

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Advantage Filter unit replacement filters

Post by bradders » Mon 05 Nov , 2007 14:52 pm

How do I know which filter needs replacing when I get the 75% used light illuminated ?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Mon 05 Nov , 2007 15:18 pm

Remove either of the filters from the Advantage Unit and switch it back on again. If the 75% filter warning light goes out then the filter that was removed needs replacing, if it does not go out then it is the filter in the Advantage unit that needs replacing.

Replacement 2 stage Pre-Filter Pt No BI01830B
Replacement Combined HEPA and Gas Chemical Filter Pt No BI01830A

Post Reply