Versa Laser will not start up

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Versa Laser will not start up

Post by bradders » Fri 13 Jul , 2007 11:43 am

All the usual have been checked, fuses, power, USB etc

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Fri 13 Jul , 2007 11:47 am

Reply from ULS in the USA

Disconnect the 2 small wire lead from the transformer.

Doing this loses the start up menu on the screen, but makes the control buttons on the Versa Laser software screen and Laser its self active.

Awaiting a response from Versa Laser as what to do next

Post Reply