The Z axis will not come far enough up to recalibrate

Help, advise and examples created by the Universal Laser Systems (ULS) VersaLaser laser cutting / marking machine supplied by Denford

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

The Z axis will not come far enough up to recalibrate

Post by bradders » Mon 09 Feb , 2009 11:16 am

I think the calibrate button was pressed inadvertantly and now the Z axis will not come far enough up to recalibrate using the setting tool
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Mon 09 Feb , 2009 11:18 am

Press the CALIBRATE button in the SYSTEM (Tab) section and use the up and down keys there to recalibrate both the engraving and honycomb beds
Top
Post Reply

Return to “VersaLaser”